Installation with the S:FLEX standing seam clamp directly onto the roof – without penetration
The advantages of the S:FLEX standing seam clamp at a glance:
- Direct attachment of the modules to the standing seam with the S:FLEX standing seam clamp and clickable module clamps
- Installation via cross-adapter connection also possible
- No additional load on the roof membrane due to thermal expansion with direct mounting
- No roof penetration –- no leaks
- Wide clamp design ensures the load is distributed across the surface of the seam
- Low logistics costs due to fewer components and compact designs with no long articles
- Made of weather-resistant aluminium and stainless steel
- We will gladly create the structural design for our customer's projects if required – the documentation we provide includes the structural analysis as well as the installation plan for all components
Components
Standing seam clamp 2.1
Direct attachment of the modules without damaging the roof membrane.
End and mid clamps
S:FLEX module clamps have an extremely wide clamping area and are therefore suitable for all standard modules and frame heights of 30-50mm. High torsion resistance and our latest, ultra-smooth one-click technology make installation a snap.
Framed modules can be quickly, safely and cost-effectively installed directly on the roof membrane with our standing seam clamp – with our proven one-click technology, without roof penetration and with minimal transport costs and storage space requirements.
The S:FLEX standing seam clamps DCO/CL for metal profiles such as Domitec/GBS/Klip-Lok®
The advantages of the S:FLEX standing seam clamps DCO and CL at a glance:
- Direct attachment of the modules to the sheet metal profile with the standing seam clamp and clickable module clamps
- Suitable for metal industrial system roofs (such as Domitec, Klip-Lok® or similar)
- Installation via cross-adapter connection also possible
- No additional load on the roof membrane due to thermal expansion with direct mounting
- No roof penetration –- no leaks
- Wide clamp design ensures the load is distributed across the surface of the sheet metal profile
- Low logistics costs due to fewer components and compact designs with no long articles
- Made of weather-resistant aluminium and stainless steel
- We will gladly create the structural design for our customer's projects if required – the documentation we provide includes the structural analysis as well as the installation plan for all components
Components
Standing seam clamp DCO
Direct attachment of the modules without damaging the roof membrane for clamping widths of 7–25 mm.
Standing seam clamp CL
Direct attachment of the modules without damaging the roof membrane for clamping widths of 20–33 mm.
End and mid clamps
S:FLEX module clamps have an extremely wide clamping area and are therefore suitable for all standard modules and frame heights of 30-50mm. High torsion resistance and our latest, ultra-smooth one-click technology make installation a snap.
With both the DCO and the CL model, framed modules can be easily installed without roof penetration – and very quickly thanks to our one-click technology. Safe, easy and cost-efficient.
On roofing that does not permit direct module installation, standing seam clamps can also be used in combination with S:FLEX rails and cross adapters.